The forestry crane Mv78T has a crane length of 7.8 m and a lifting capacity of 675 kg at maximum reach. The crane has a lifting torque of 81 kNm (gross) and a slewing torque of 21 kNm.
The Mv78T forestry crane is equipped with a slewing motor with 4 slewing cylinders and has a wide-angle linkage system, telescopic boom, 6-tonne endless rotator, hydraulic hose connection to the crane column and rotator, rotator link with double brake, FB260 grapple and control block.
The Mv78T has a number of improved features: longer reach, higher lifting torque, higher slewing torque, and better movement pattern. The crane has a newly developed telescopic boom with a protected hose guide.
More information about Crane MV78T
Product info
Forestry cranes are normally used together with timber trailers, depending on the load capacity and desired crane reach. They are usually installed directly on the prepared crane base of the trailer.
Another way to install loader cranes is to mount them on agricultural tractors – they are mounted on a 3-point hitch and connected to the tractor’s 3-point linkage system. Forestry cranes are also often used for wood chippers, splitters, etc. Crane operation is the safest and most efficient way to feed the material.
All our cranes are supplied with a boom that is prepared for the installation of a cable winch. This facilitates subsequent assembly when the need arises. The winch – an important tool for effective work – extends the working area and makes it easier to collect individual logs.
Another fairly important accessory for crane operation is the grapple. The Mv78T crane is equipped with the FB260 grapple as standard. A robust construction, high-quality components and a proven design solution contribute to the grapple’s long service life. The maximum grab opening width is 1370 mm with a grab area of 0.26 m².
Timber cranes can be equipped with different control systems depending on customer requirements. As standard, cranes are equipped with mechanical rotary lever control, but you can also choose to upgrade to ON/OFF, electro-hydraulic control system or even a radio-controlled system.
The recommended oil flow for operating the Mv78T crane is 70 – 90 l/min.
| Crane Mv78T suitable for: | |
| Trailer FB120D | 3-Point attachment frame |
Technical info
| GENERAL | |
| Reach, m |
7.8 |
| Telescopic boom |
1.80 |
| Lifting torque (gross), kNm |
81 |
| Lifting torque (net), kNm |
52 |
| Lifting capacity at 4 m w/o grapple and rotator, kg |
1400 |
| Lifting capacity at max. reach (net), kg |
675 |
| Slewing torque, kNm |
21 |
| Slewing angle, ° |
360 |
| Weight (with grapple, rotator, valve block), kg |
1320 |
| Recommended pump capacity, l/min |
70 – 90 |
| Working pressure, bar |
185 |
| STANDARD EQUIPMENT | |
| Slewing cylinders, pcs |
4 |
| Linkage system |
yes |
| Rotator |
GV6 |
| Rotator link |
with double brake |
| Connection of hydraulic hoses to the rotator |
yes |
| Hydraulic hose connection to crane column |
yes |
| Grapple |
FB260 (0.26 m2) |
| Valve block |
CRV80/8A |
Accessories
| OPTIONS FOR CRANE Mv78T |
| Protection plate for lifting cylinder |
| LED work light for attachment to the crane boom |
| LED work lights for attachment to the crane column |
| Chainsaw holder |
| Grapple FB210 (0.21 m2) |
| Brash grapple FB210S (0.21 m2) |
| Grapple bucket FB120V (120 l) |
| Bucket for grapple |
| 5t rotator with flange |
| Shut-off valve for lifting cylinder |
| Supply pressure manometer, for controlling the operating pressure |
| Winch 1410KPL with remote control |
| 3-Point attachment frame |
| Independent hydraulic system (trailer version) |
| Independent hydraulic system (3-Point attachment frame version) |
| Valve block cover |
| Valve alternatives |
