The P65 has a reach/lifting capacity of 6.5 m/500 kg.
Parallel crane performs two actions at once (retraction) and has a movement pattern that enables loads to be stacked high. The crane requires a lower oil flow compared to other cranes. This enables it to be operated at low engine speeds, which saves fuel and the environment and provides a more comfortable noise level in the cab. The crane has a lifting torque of 43 kNm.
As standard, it is equipped with a 3t rotator, FB160 grapple and CRV60 (2 lever/3 coordinate) valve block.
More information about Crane P65
Technical info
| Crane | P65 |
| Reach (m) | 6.5 |
| Lifting torque, gross (kNm) | 43 |
| Lifting capacity at max. reach (kg) | 500 |
| Slewing torque (kNm) | 11 |
| Slewing angle (degrees) | 360 |
| Rec. oil flow (l/min) | 30–35 |
| System pressure (bar) | 185 |
| Weight w/o grapple and rotator (kg) | 850 |
| Standard equipment | |
| Hydraulic valve | Mechanical |
| Rotator (tonnes) | 3 |
| Grapple | FB160 |
| Optional equipment | |
| Work lighting, crane arm | Yes |
| Winch (crane mounted) | Yes |
| Radio-controlled winch | Yes |
| Other options | |
| Valve options | |
| 2-lever mech. | Yes |
| 2-lever lightweight assembly el. on/off | Yes |
| PCL low-pressure servo | Yes |
| EHC electric servo | Yes |
| Radio control, crane | Yes |
