The forestry crane M75T has a crane length of 7.5 m and a lifting capacity of 500 kg at maximum reach. The crane has a lifting torque of 55 kNm (gross) and a slewing torque of 16 kNm.
The M75T forestry crane is equipped with a slewing motor with 4 slewing cylinders and has a wide-angle linkage system, telescopic boom, 4-tonne endless rotator, hydraulic hose connection to the crane column and rotator, rotator link with pending brake, FB190WF grapple and control block.
The overhead lifting cylinder provides the best lifting capacity in a normal working range at about 4 meters from the slewing gear. The main boom is curved to achieve a better lifting moment at the “correct” reach of 4 meters
More information about Crane M75T
Product info
Forestry cranes are normally used together with timber trailers, depending on the load capacity and desired crane reach. They are normally installed directly on the prepared crane base of the trailer.
Another way to install loader cranes is to mount them on agricultural tractors – they are mounted on a 3-point hitch and connected to the tractor’s 3-point linkage system. Forestry cranes are also often used for wood chippers, splitters, etc. Crane operation is the safest and most efficient way to feed the material.
All our cranes are supplied with a boom that is prepared for the installation of a cable winch. This facilitates subsequent assembly when the need arises. The winch – an important tool for effective work – extends the working area and makes it easier to collect individual logs.
Another fairly important accessory for crane operation is the grapple. The M75T crane is equipped with the FB1190WF grapple as standard. A robust construction, high-quality components and a proven design solution contribute to the long service life of the grapple. The maximum grab opening width is 1200 mm with a grab area of 0.19 m².
Timber cranes can be equipped with different control systems depending on customer requirements. As standard, cranes are equipped with mechanical rotary lever control, but you can also choose to upgrade to ON/OFF, electro-hydraulic control system or even a radio-controlled system.
The recommended oil flow for operating the M75T crane is 40 – 60 l/min.
| Crane M75T suitable for: | ||
| Trailer FB90D | Trailer FB100 | Trailer FB100-2WD |
| Trailer FB120D | 3-Point attachment frame | |
Technical info
| GENERAL | |
| Reach, m |
7.5 |
| Telescopic boom |
1.80 |
| Lifting torque (gross), kNm |
55 |
| Lifting torque (net), kNm |
37.5 |
| Lifting capacity at 4 m w/o grapple and rotator, kg |
1100 |
| Lifting capacity at max. reach (net), kg |
500 |
| Slewing torque, kNm |
16 |
| Slewing angle, ° |
360 |
| Weight (with grapple, rotator, valve block), kg |
740 |
| Recommended pump capacity, l/min |
40 – 60 |
| Working pressure, bar |
185 |
| STANDARD EQUIPMENT | |
| Slewing cylinders, pcs |
4 |
| Linkage system |
yes |
| Rotator |
CR400 |
| Rotator link |
with pending brake |
| Connection of hydraulic hoses to the rotator |
yes |
| Hydraulic hose connection to crane column |
yes |
| Grapple |
FB190WF (0.19 m2) |
| Valve block |
CRV80/8A |
Accessories
| OPTIONS FOR CRANE M75T |
| LED work light for attachment to the crane boom |
| LED work lights for attachment to the crane column |
| Chainsaw holder |
| Grapple FB190 (0.19 m2) |
| Brash grapple FB190S (0.19 m2) |
| Grapple FB210 (0.21 m2) |
| Brash grapple FB210S (0.21 m2) |
| Grapple FB260 (0.26 m2) |
| Grapple bucket KG180 (0.11 m3) |
| Grapple bucket FB120V (120 l) |
| Bucket for grapple |
| 4t rotator with flange |
| Shut-off valve for lifting cylinder |
| Supply pressure manometer, for controlling the operating pressure |
| Winch 1410KPL with remote control |
| 3-Point attachment frame |
| Independent hydraulic system (trailer version) |
| Independent hydraulic system (3-Point attachment frame version) |
| Valve block cover |
| Valve alternatives |
